£54.50
40-68cm Undermount Sink Brackets Adjustable Support Sink Legs Easy Installation
-
Brand:
CNCEST
-
Product Code:
JZSKC4X8WDLBS
-
Availability:
In Stock
High-quality Material
This product is made of high-quality 304 stainless steel and aluminum alloy, and has been laser welded and anodized, which has high hardness, high wear resistance, anti-corrosion, anti-rust performance, and long service life.
High Stability
The wide base (3.46 inches) can effectively enhance the stability of the product, allowing it to support the sink more stably.
Strong Load Bearing
A single steel pipe (diameter
Easy to Install
You don't need to drill holes in the countertop, or remove the sink or pipes, or buying epoxy to use this product. You just need to place the bracket at the bottom of the sink, then adjust to the desired height and tighten the screws.
Height Retractable
The adjustable height (15.75-26.77 inches) allows it to fit most sinks, thus making your installation easier.
Pack of Two
Two brackets provide you with more balanced support and higher weight-bearing capacity.
.jpg)
Double Screw Locking
The steel tube joint is double screwed to make it stronger and less likely to loosen.
.jpg)
Anti-slip Pads
The anti-slip pads on the bottom and top of the product can effectively enhance the friction between the product and the sink and the ground, thus enhancing the stability of the product.
.jpg)
Application
This product can be used as a sink support for restrooms, kitchens and showers. The height adjustment range of the stand is 15.75-26.77 in.
.jpg)
Specifications
-
Material:
304 Stainless Steel, Aluminum Alloy
-
Color:
Silver
-
Process:
Laser Welding, Anodizing
-
Assembly Required:
Yes
-
Each Load Capacity:
75kg/165.35lbs
-
Tube Diameter:
30mm/1.18in
-
Tube Thickness:
0.8mm/0.03in
-
Aluminum Plate Thickness:
3.5mm/0.14in
-
Base Diameter:
Approx. 88mm/3.46in
-
Total Length of Retractable Product:
40-68cm/15.75-26.77 in
-
Package Size:
40*11*11cm/15.75*4.33*4.33 in
-
Net Weight:
1kg/2.2 lbs
-
Gross Weight:
1.45kg/3.2 lbs
.jpg)
Package Included:
-
2 * Main Rods
-
2 * Bottom Bases
-
2 * Top Adjustable Bases
-
2 * Screws
-
4 * Anti-slip Pads
-
1 * Wrench
-
1 * Hex Key
Specifications
| Material |
304 Stainless Steel, Aluminum Alloy
|
| Color |
Silver
|
| Process |
Laser Welding, Anodizing
|
| Assembly Required |
Yes
|
| Each Load Capacity |
75kg/165.35lbs
|
| Tube Diameter |
30mm/1.18in
|
| Tube Thickness |
0.8mm/0.03in
|
| Aluminum Plate Thickness |
3.5mm/0.14in
|
| Base Diameter |
Approx. 88mm/3.46in
|
| Total Length of Retractable Product |
40-68cm/15.75-26.77 in
|
| Package Size |
40*11*11cm/15.75*4.33*4.33 in
|
| Net Weight |
1kg/2.2 lbs
|
| Gross Weight |
1.45kg/3.2 lbs |
Notes:
Installation Steps:
1. Install the base.
2. Adjust to the desired length and tighten the screws.
3. Fine-tune the upper screw.
Notes:
1.Please measure the height of the bottom of the sink to the floor before purchasing.
2.Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
Product
Reviews
Recommer
Delivery and Return
.jpg?x-oss-process=image/resize,m_fill,w_1000,h_1000 "40-68cm Undermount Sink Brackets Adjustable Support Sink Legs Easy Installation")
.jpg?x-oss-process=image/resize,m_fill,w_1000,h_1000 "40-68cm Undermount Sink Brackets Adjustable Support Sink Legs Easy Installation")
.jpg?x-oss-process=image/resize,m_fill,w_1000,h_1000 "40-68cm Undermount Sink Brackets Adjustable Support Sink Legs Easy Installation")
.jpg?x-oss-process=image/resize,m_fill,w_1000,h_1000 "40-68cm Undermount Sink Brackets Adjustable Support Sink Legs Easy Installation")
.jpg?x-oss-process=image/resize,m_fill,w_1000,h_1000 "40-68cm Undermount Sink Brackets Adjustable Support Sink Legs Easy Installation")
.jpg?x-oss-process=image/resize,m_fill,w_1000,h_1000 "40-68cm Undermount Sink Brackets Adjustable Support Sink Legs Easy Installation")
