Notes

1.This package does not include oil.
2.Before starting the machine, make sure that all accessories have been installed properly. It is necessary to start the safety switch first and then turn on the machine switch to ensure the normal operation of the machine and reduce accidental injury. It is recommended that novice users use twigs to test several times before they can use them properly. Right-handed users use electric saws, and left-handed users are advised to use them carefully.
3.The batteries supplied are partially charged. To ensure the full capacity of the battery, please completely charge the batteries before using this machine for the first time. If the battery indicator is green, it means it is fully charged and can be used directly without charging. Recharge only with the charger specified by the manufacturer.
4.Please do not continue to press the on/off switch after the machine has been automatically switched off. The battery can be damaged. If the battery is overheated after prolonged use, let the machine take a break for safety.
5.Lithium-ion batteries are protected by "Electronic Battery Protection (ECP)" to prevent deep discharge. When the battery is exhausted, the machine is shut down through the protection circuit. To remove the battery, please press the unlocking buttons and pull out the battery downwards without exerting any force. If the battery is not used for a long time, it is recommended to charge it once every three months to keep the battery active.

How to Assemble

1.Prepare the tools.
2.Remove the cover.
3.Install the chain on the guide plate. Please pay attention to the direction of the chain.
4.Install the guide plate and the chain on the chainsaw, align the small holes, and then install the chain on the gear.
5.Cover and Screw on.
6.Adjust sprocket tension.
7.Tighten the nut.
8.Install the battery, check if the safety lock is locked, and then you can use it.