Material | Wood |
Size | 70*50cm/ 27.55*19.68in |
Bracket Length | 40cm/ 15.94in |
Package Weight | 1.6kg/ 3.5 lbs |
Notes
1.The thread is not included in the package. Please prepare it before use.
2.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
Steps for Use
1.Preparation for Winding: Before winding, use white thread to loop and knot the first groove of the bottom fixing pivot to secure it. Leave about five centimeters of thread at the knot. Snap in the leftmost coil and make the thread wrap around to the top and snap it back to the bottom. Follow the previous steps for successive windings. Check it after all the winding is done.
2.Install the Bobbin: Install the bobbin in the middle of the loom so that it can be pushed normally. The bobbin row needs to pay attention to the deep and shallow grooves, arrange the threads neatly one on top of the other, and the threads will change when you start to turn the bobbin.
3.Threading: Pass the bobbin between the white threads, through one thread and then turn the bobbin in the other direction. Just continue through the second one and repeat this step.